Coreshield 15 is an all-position self-shielded flux cored welding wire for single pass applications.
Coreweld 46 LS is a new generation metal cored wire based on ESAB’s revolutionary cored wire surface technology.
A 1% Ni metal cored wire which gives good toughness down to -50°C using M21 shielding gas. Diameters less than 1.4 mm are all-positional except vertical down
A metal cored wire containing 1% Cr 0.5% Mo for submerged arc welding. Used with OK Flux 10.63 fully basic flux, the weld metal is of the highest metallurgical integrity for service temperatures up to 500°C
AISI 307 type metal-cored wire with a hot cracking-resistant austenitic weld metal, for welding armour steel, austenitic-manganese steel and dissimilar steels..
Stoody AP stainless steel wires are designed for welding in all positions with Argon/CO2 gas mixtures or 100% CO2. These wires exhibit a spray like arc transfer, easy slag removal and can be welded within a wide range of parameters. Stoody 410NiMo
OK Tigrod 1070 is highly resistant to chemical attack and weathering. It is a relatively soft alloy that is very formable and it is used extensively in thin-gauge and foil products.
This oven is designed for rugged site conditions, where it can be used as either a holding or a storage oven. Temperature range.
OK Tigrod 13.08 is a 1.5Mn-0.4Mo-alloyed (ER80S-D2), copper-coated rod for the GTAW of creep-resistant steels of the same type, such as pipes in pressure vessels and boilers with a working temperature of up to about 500°C. The rod can also be used for welding low-alloyed, high tensile strength steels.
Copyright © 2017 Cinqtech Nigeria Limited. All rights reserved | Design by Kessian Concepts
